Regular Cleaning

Regular cleaning is an important part of maintaining the appearance and functionality of aluminum awning windows. The windows should be cleaned at least twice a year, or more frequently if they are located in areas with high levels of dirt, dust, or pollution. A mild detergent mixed with water is used to clean the aluminum frames. A soft cloth or a soft - bristle brush is employed to gently scrub the surface, being careful not to scratch the anodized or powder - coated finish.

The glass panes are cleaned using a suitable glass cleaner. Special attention should be paid to the corners and crevices of the window frame, where dirt and debris tend to accumulate. After cleaning, the windows are rinsed thoroughly with clean water to remove all traces of the detergent or cleaner. This regular cleaning not only keeps the windows looking their best but also helps to prevent the build - up of dirt and grime, which can potentially damage the window materials over time.

 Inspection for Damage

Periodic inspections of aluminum awning windows are necessary to identify any signs of damage early. The windows should be visually inspected for dents, scratches, or any signs of wear and tear on the aluminum frames. Small dents can sometimes be repaired by gently tapping them out using a rubber mallet and a block of wood. Scratches on the anodized or powder - coated finish can be touched up using a matching touch - up paint or pen, following the manufacturer's instructions.

The hinges, locks, and other hardware should also be inspected regularly. Loose screws or bolts should be tightened immediately to ensure the proper operation of the window. Any signs of rust or corrosion on the hardware, especially on the hinges, should be addressed. If the hardware is severely damaged or rusted, it may need to be replaced to maintain the smooth operation and security of the window.

 Lubrication of Moving Parts

Lubrication of the moving parts is essential for the smooth and reliable operation of aluminum awning windows. The hinges, which bear the weight of the window sash and facilitate its movement, should be lubricated at least once a year. A silicone - based lubricant is recommended as it does not attract dirt and dust, which can interfere with the movement of the hinges.

The lubricant is applied sparingly to the hinge pins and the moving parts of the hinge mechanism. After applying the lubricant, the window sash is opened and closed several times to distribute the lubricant evenly. The crank mechanism, if present in manual - opening windows, should also be lubricated to ensure smooth operation. This regular lubrication helps to reduce friction, prevent wear and tear, and extend the lifespan of the window's moving parts.