Regular Cleaning

Regular cleaning is essential to keep aluminum fixed glass windows looking their best and functioning properly. The windows should be cleaned at least twice a year, or more frequently if they are located in areas with high levels of dirt, dust, or pollution. A mild detergent mixed with water is used to clean the aluminum frames. A soft cloth or a soft - bristle brush is employed to gently scrub the surface, being careful not to scratch the anodized or powder - coated finish.

The glass panes are cleaned using a suitable glass cleaner. Special attention should be paid to the edges and corners of the glass, as well as the sealant joints, where dirt and debris tend to accumulate. After cleaning, the windows are rinsed thoroughly with clean water to remove all traces of the detergent or cleaner.

 Inspection for Damage

Periodic inspections of aluminum fixed glass windows are necessary to identify any signs of damage early. The windows should be visually inspected for cracks, chips, or any signs of damage to the glass panes. Small chips or cracks in the glass can be repaired using specialized glass repair kits, but if the damage is extensive, the glass may need to be replaced.

The aluminum frames should also be inspected for dents, scratches, or signs of corrosion. Minor scratches on the frame can be touched up using a matching touch - up paint or pen, following the manufacturer’s instructions. Any signs of corrosion should be addressed immediately to prevent further damage to the frame.

The sealant joints around the glass should be inspected for any signs of cracking, peeling, or deterioration. If the sealant is damaged, it should be removed and replaced with a new, high - quality sealant to ensure a watertight and airtight seal.

 Lubrication (Minimal for Fixed Windows)

Although aluminum fixed glass windows have few moving parts, if there are any adjustable components, such as operable muntins or hardware for cleaning access, they should be lubricated periodically. A silicone - based lubricant is recommended as it does not attract dirt and dust, which can interfere with the movement of the components.

The lubricant is applied sparingly to the relevant parts, and any excess is wiped away. The components are then tested to ensure smooth operation.